Aimpoint Micro T-1
The Micro T-1
is a 1X (non magnifying) optic that features a 4 minute of angle
(MOA) red dot for fast target
acquisition.
No tools are required to zero the
sight, as the top of the caps covering the windage and elevation screws
fit
directly into
holes on the adjustment screws to make the adjustment. The Micro T-1 is
waterproof to 25 meters (80 feet).
Lehtitestien mukaan ei olisi parallaksivapaa!
Optical System
Operating Principle: Passive Red Dot Collimator Reflex Sight
Acticle Number: 11830
Optical Magnification: 1x Unlimited eye relief
Clear Aperture: 20mm
Aiming Dot Size: 4 MOA (1.2 mRad)
Optical Coating: Anti reflex and Band Pass coatings, NVD compatible
Dot Brightness: 12 settings - 4 NVD and 8 Daylight of which 1 Extra bright
Dot brightness manually adjusted
Dot Color: Red (650 nm wavelength)
Optical Signature: No forward optical signature from the dot beyond 10 meters
Power Source
Battery Type: One 3V Lithium battery, type CR2032, commercially available
Battery Life, typical: Over 5 years of continuous (day and night) use at
pos 8 of 12
and over 10 months at pos 10 to 12 (average values
for all models) at room
temperature and for a quality battery
Typically 500.000 hours at NVD setting. Storage battery
10 years
Physical Specifications
Dimensions (L x W x H): 62mm x 41mm x 36mm (2.4" x 1.6" x 1.4") Sight only
62mm x 41mm x 40mm (2.4" x 1.6" x 1.6") Sight with
Mount
Height of Optical Axis: 18mm (0.7") over top surface of Picatinny Rail
Mass: 84 grams (3.0oz) Sight only
105grams (3.7oz)
Sight with Mount
Adjustment: Range ±1
m at 100 meters (±1 yards at 100 yards) in wintage and elevation
1 click =
10 mm at 80 meters = 13 mm at 100 meters - ½"
at 100 yards
Material - Housing: Extruded, high strength aluminium, hard anonized, black to
grey dark
None glare finish
Material - Lens Covers: Rubber, black, non glare finish - no other covers
Environmental Specifications
Temperature Range, Operating and Storage:
-45oC to +71oC (-50oF to
+160oF)
Thermal Shock:
-45oC to +71oC in 60 seconds and vice versa with
temperature stabilization in between
Humidity: 95% at 20oC (68oF) to 50oC (122oF),
cycling
Immersion: 25m (80 ft.)
Shock: 3 x 500 G 0.7 - 1.1. ms
Vibration: XYZ: 10 - 30Hz: 3mm, 30 - 150Hz: 5.75 G for 30 minutes
Chemical Resistance: Not affected by weapons cleaners, lubricants, oil or insect
repellants
Mechanical Interface
Keyed Surface: Patent pending mount keyed to the sight body to absord recoil
Keyed Mount: Mount to MIL-STD 1913 Rail System "Picatinny Rail" included