State-of-the-art
technologies are applied to create new products that combine a higher protection
level with
less weight and also to design and manufacture the product according to the
customer's needs, in different
sizes and shapes.
Plate | Product Code | Protection Level | SA / NSA | Maximum Trauma (mm) |
Maximum Weight (kg) |
Super light | RSP 72516 | III | NSA | 44 | 1.2 |
Light | RSP 72512 | III | NSA | 40 | 1.4 |
Light | RSP 72510 | III | SA | 44 | 1.6 |
Ceramic- Polyethylene | RCP-030 | III / IV | NSA | 44 | 3.0 |
Ceramic- Polyethylene | RCP-031 | Special | SA | 44 | 2.6 |
Ceramic | RCP-7302 | III / IV | SA | SA | 3.75 |
R-ESAPI Hard Armor Plate | R-ESAPI | APM2, M80, SS109 | SA | SA | 2.5 |
Norwegian Defence Material
NFM can supply multiple solutions for ballistic protection, according to
customer's requirements, whether you need
Polyethylene or Aramid. The same goes for level of ballistic protection. To
provide extra protection against knives, we
can either supply traditional solutions or aluminium plates. All our vests may
be supplied with pockets for ballistic plates
and attachments for further upgrading. Should there be need for any other
solutions, please contact us at NFM.
Ballistic protection is an area under constant developement and innovation. NFM
will always use the most recent
technologies available.
Rena QRS
The NFM
concept for ballistic protection is based on the user
wearing concealed body armor under the fi eld jacket or
the coverall. On top of this you wear a tactical vest which can be upgraded with
ballistic elements. By adding hard ballistic
plates in the front and back you get a high level of protection, without adding
new elements. If a light vest is combined
with the tactical vest there is no protection of the throat, neck, groin and
upper arm. Our vests can rapidly be set up for
attaching extra protection, such as a ballistic collar. A throat protection may
be added to the ballistic collar. It is
adjusted with two buckles and can easily be removed.