GORE-TEX® Fabric Repair Kit The essential field repair kit for all types of repairs including tents, sleeping
pads, rainwear, backpacks, boots and more. Kit includes two adhesive backed GORE-TEX® fabric pressure-
sensitive patches. Ideal for GORE-TEX and WINDSTOPPER® Fabric.
Available in Black, Navy, Tan, Yellow, Red, Green, Woodland Camo & Desert Camo
Varastossa: Musta & Woodland

REPAIR KIT INSTRUCTIONS
The patches supplied in this kit will provide a temporary water resistant repair for GORE-TEX® fabric products.

-Patches should be kept in sealed plastic bag until used.
-Area to be repaired must be clean and dry.
-Patch will not adhere effectively to loose debris, grease or oil.
-Patch should overlap tear by at least ½" in all directions.
-Remove release paper from back of patch. Lay GORE product on a smooth flat surface and apply patch using
  finger pressure (adhesive side down). Rub patch surface in a circular motion from the center out covering the
  entire patch area.
-Product can be used immediately; however, the adhesive will continue to strengthen over the next 12 to 24 hours.
-The durability of the patch can be enhanced by applying heat and moderate pressure. Use a clean iron and set to
  medium heat.  Press with moderate pressure in a circular motion for 30 seconds.