UNIVERSAL DIGITAL REMOTE CONTROL
The remote can be used to control one light or several lights
at a time and has a range with its standard
transmitter of over 1 mile. The standard transmitter can also be attached to
high gain antennas repeaters
and / or amplifiers to increase its range. The transmitter, receiver and lights
for this system are all pocket
sized.
The remote can be used to switch on our lights, both visual and infrared, and is
ideal for marking landing
zones and drop zones. There are also numerous other applications using our
lights or other apparatus.
The unit has been used in the recent theatres of operation by special forces
with great success.
Complete Kits:
#98201 Standard Kit
#98203 Standard System with Traffic Control
#98204 Interactive System
#98206 Interactive System with Traffic Control
Standard Transmitter
Model 98101
This unit has eight secure codes that
can be used for on/off control of the
manually selected IR or White modes on the VIPIR 02800-0 lights.
This controller can also operate the traffic control functions on the 02800-1
and 02800-3 lights using its two bottom codes.
This transmitter can also be used with any VIP™ or VIPIR™ to turn on any
manually preselected mode on the light.
Interactive Transmitter Model 98104
This unit has eight secure codes that can be used for direct control of the
VIPIR™ 02802-0 lights. This controller can switch the light from flashing to
steady on and also change the lights color on the fly.
Interactive Transmitter Model 98105
This unit has eight secure codes that can be used for direct control of the
VIPIR™ 02803-0 lights used in traffic control. This controller can switch the
lights pattern and color on the fly
Receiver Model
Simple On/Off or interactive control
Compact, pocket size
Extended standby time
Single AA Battery
Multible configurations selectable on the fly
Water resistant: Up to 2 meters
Range: Up to 35 km
Weight: 272 g
Width: 2.7 cm
Height: 4 cm
Length: 7,6 cm
Temperature Range: -20oC to 65oC
Standard Receiver Model 99007
This receiver is for use with any VIP™ or VIPIR™ to
turn on any
manually pre-selected mode on the light. The receiver is programmable
by the transmitter to reply to any of its eight secure codes.
Interactive Receiver Model 99007-4
This receiver is for use with any Gen.4 Chameleon VIPIR™.
Direct control
of the lights functions can be accessed in conjunction with the interactive
transmitter.